Deploying decentralized wireless infrastructure globally, at scale

Why work with Zeppelin?

Zeppelin is a leader in deploying, managing and monetizing decentralized wireless infrastructure.  We leverage our decades of collective experience in carrier and enterprise networking to ensure the highest quality deployments, better monetization and maximum uptime – which means stable recurring revenue for you, with less hassle.  We leverage only fully certified and insured installers to install carrier-grade infrastructure so you can rely on a professional process from start to finish.

Revenue share

Check for offers below to see how much you can earn.

Various locations across the US

Check back soon if you don’t see your location supported now.

Check for Offers

Enter your address. Have multiple properties?

Equipment Proposal

Depending on specific site characteristics such as directions faced, line of sight, height and other factors, we deploy a variety of hardware at a given locations.  For example, at rooftop sites with greater height and where many different directions can be covered, we may install as many as four different ‘nodes’.  Rooftop nodes can be mounted using free-standing, non-penetrating mounts such as the one pictured below.  In other instances, equipment can be wall mounted, for example on the side of an elevator shaft enclosure on a rooftop (see image below).  Ancillary equipment (switches, routers, LoRa devices and the like) can be mounted either in weatherproof enclosures, or within designated network /utility rooms or cabinets depending on the site layout.

Descriptions of the equipment we deploy are provided below.  All you need to do is indicate the quantity of nodes you are willing to host, and we’ll work with you to figure out the rest.  (Note, we generally require at least two nodes at each location, but there are exceptions!)  We’ve also included some examples of what some install types look like.

Node A: Helium 5G Node

Primary Hardware
Gateway: 1 x FreedomFi Helium 5G Gateway
Radio: 1 x Baicells 436H
Antennas: 1 KP Performance KP-3SX4-90 Panel Antenna (or similar as suitable for site)
Frequency: 3.55 – 3.7 Ghz
Power Consumption Gateway: 10W (average), 20W (peak)
Radio:  60W (average), 100W (peak)
Power One Single-Phase 120VAC power outlet required, 15 amp circuit (note, multiple outlets and higher amperage circuits may be required for multiple node deployments, depending on site characteristics.
Max Tx Power 30 dBm/Antenna
Networking and Data Usage

•Fiber handoffs preferred, but possible to utilize copper 100/1000 Mbps Ethernet port depending on deployment.

•Required network speed:  minimum 200Mbps (down) / 20Mbps (up) and latency <50ms

•Monthly data usage: Minimum 100Gb/mo., up to multi-Tb data volume depending on usage

Dimensions •Overall dimensions – 35″ x 35″ x 85″ (approximate total volume as/when mounted on non-penetrating roof mount
Weight

Total weight: Up to 220 lbs

– eNB: 12.5lbs

– Antenna: 20-25lb each

– Four anchor weights, 16 in. L x 8 in. W x 8 in. H each weighing up to 40lbs

– Mounted weather rated equipment enclosure, cabling, access gateway: 25lbs

Node B: XNET Rooftop Node (Roofus)

Primary Hardware
Gateway: 1 x XNET xNode multi-port gateway
Radio: 2 x Blinq Fw-300i
Antennas: Integrated
Frequency: 3.55 – 3.7 Ghz
Power Consumption Gateway: 10W (avg); 24W (peak)
Radio:  180W (peak, each))
Power One Single-Phase 120VAC power outlet required, 15 amp circuit (note, multiple outlets and higher amperage circuits may be required for multiple node deployments, depending on site characteristics.
Max Tx Power Up to 53 dBm per antenna
Networking and Data Usage

•Fiber handoffs preferred, but possible to utilize copper 100/1000 Mbps Ethernet port depending on deployment.

•Required network speed:  minimum 200Mbps (down) / 20Mbps (up) and latency <50ms

•Monthly data usage: Minimum 100Gb/mo., up to multi-Tb data volume depending on usage

Dimensions •Overall dimensions – 26” x 25” x 16” (approximate total volume as/when mounted on non-penetrating roof mount
Weight

Total weight: Up to 220 lbs

– Radio/Antenna – ~30lbs each

– Four anchor weights, 16 in. L x 8 in. W x 8 in. H each weighing up to 40lbs

– Mounted weather rated equipment enclosure, cabling, access gateway: 25lbs

Node C: XNET Max Rooftop Node (Magnus)

Primary Hardware
Gateway: 1 x XNET xNode multi-port gateway
Radio: 1 or 2 Baicells Nova 846 eNodeB
Antennas: 2-4 KP Performance KP-3SX4-90 Panel Antenna (or similar as suitable for site)
Frequency: 3.55 – 3.7 Ghz
Power Consumption Gateway: 10W (avg); 24W (peak)
Radio:  240W (average), 300W (peak)
Power One Single-Phase 120VAC power outlet required, 15 amp circuit (note, multiple outlets and higher amperage circuits may be required for multiple node deployments, depending on site characteristics.
Max Tx Power 30 dBm/Antenna
Networking and Data Usage

•Fiber handoffs preferred, but possible to utilize copper 100/1000 Mbps Ethernet port depending on deployment.

•Required network speed:  minimum 200Mbps (down) / 20Mbps (up) and latency <50ms

•Monthly data usage: Minimum 100Gb/mo., up to multi-Tb data volume depending on usage

Dimensions •Overall dimensions – 20” x 60” x 15” (approximate total volume as/when mounted on non-penetrating roof mount)
Weight

Total weight: Up to 220 lbs

– eNb: ~30lbs each

– Antenna: 20-25lb each

– Four anchor weights, 16 in. L x 8 in. W x 8 in. H each weighing up to 40lbs

– Mounted weather rated equipment enclosure, cabling, access gateway: 25lbs

What happens next?

After signing up to be a host…

Empty Date

Acceptance

The operator reviews your application and validates your location. You will be notified by Airwaive once accepted.
Empty Date

Equipment Installation

Instructions to acquire equipment, or schedule a technician, are arranged between you and the operator
Empty Date

Live Network

You're live! If you are a Superhost, you can begin marketing the network to increase your earnings.